Fujitsu fi-7300NX, Operator'S Manual

Page: 30 / 321

Item Overview
Document Count The number of documents can be counted without
outputting images of the documents.
● See Also
- Counting the Number of Documents (page 113)
Display language You can configure the language setting for the touch
screen.
Cleaning &
Maintenance Vertical Streak Detection You can configure the settings for detecting dirt on
the glass.
If the scanner detects dirt on the glass, the touch
screen displays a notification on when you
receive a [Clean glass!] message. Clean the glass
when you receive a message.
● See Also
- Detecting Vertical Streaks [Vertical Streak
Detection] (page 307)
-
Specifying the Sensitivity Level for Vertical Streak
Detection [Vertical Streak Sensitivity] (page 308)
Cleaning Use this setting when you clean the inside of the
scanner.
● See Also
- Daily Care (page 114)
Consumable counters You can check the number of sheets scanned.
After you replace a consumable or clean the scanner,
you can clear the counter.
● See Also
- Location and Frequency (page 116)
- Consumables and Replacement Cycles (page
127)
Scanner Settings An administrator of the scanner uses this to configure
the settings for the scanner.
●
See Also
- Scanner Settings (Touch Screen) (page 220)
Authentication/License You can check the conditions of the licenses for the
authentication label and open source software.
Limited Warranty Guide/Warranty Information The limited warranty guide or warranty information
can be checked.
Scanner Overview
30