Fujitsu fi-7300NX, Operator'S Manual

Page: 70 / 321

To use a scanner connected to a network, select a scanner that is selected in fi-7300NX Scanner Selection
Tool.
For some image scanning applications, selection of a scanner may not be needed.
6
In the setup window for the scanner driver, configure the scan settings.
For some image scanning applications, the setup window for the scanner driver may not appear.
7
Scan documents with the image scanning application.
ATTENTION
Do not perform an operation to disconnect the connection between the scanner and the computer such as the
following:
Example:
●
Disconnecting the USB cable
●
Disconnecting the LAN cable
●
Disconnecting the network
●
Logging off
HINT
When an image scanning application such as PaperStream Capture that allows you to create profiles is installed
on a computer, by setting a profile for the scanner button in the scanning application setting, the profile name is
displayed on the touch screen button of the scanner.
When the scanning application on the computer is ready to scan a document, in some cases, it is possible to scan
a document by pressing the [Scan Button] button on the touch screen of the scanner instead of operating the
scanning application to scan a document.
When the [Scan Button] button is available for a scan, even if the name of the [Scan Button] button on the touch
screen of the scanner changes to a profile name, the profile name button will still be recognized as if it were the
[Scan Button] button when it is pressed and a scan will be performed accordingly.
How to Perform a Basic Scan
70