Fujitsu fi-7300NX, Operator'S Manual

Page: 241 / 321

Image
Automatic Page Size Detection
When the scanner is set to detect the paper size automatically, specify whether or not to optimize (round
up/down) the fractional part of the scanned image.
When the paper size is detected, there may be a fractional part of the scanned image compared to the
standard paper size.
Output image size varies depending on how the fractional part is processed.
● Optimize
Prevents loss of information.
However, a shadow may appear around the edges of images.
This is the factory default setting.
●
Round Down
The image size becomes the standard paper size.
However, when you scan a document with text around the edges, a part of the information may be
missing in the output image.
ATTENTION
For details about setting automatic page size detection, refer to the help for the scanner driver.
HINT
This setting is effective only for scanning images in black & white.
Page Edge Filler Area
Configure the settings to fill in the shadow or streaks around the edge of the scanned image.
Depending on the condition of the documents that you scan, the shadow of a document may appear as
black streaks on the edges of the scanned image.
In this case, remove the black streaks by filling in the edges of the scanned image.
The specified area is filled in white or black, according to the background color.
Top (mm)
Specify the width of the top margin to fill in. The factory default setting is "0".
Bottom (mm)
Specify the width of the bottom margin to fill in. The factory default setting is "0".
Right (mm)
Specify the width of the right margin to fill in. The factory default setting is "0".
Scanner Settings (Touch Screen)
241