Fujitsu fi-7300NX, Operator'S Manual

Page: 116 / 321

Location and Frequency
Location Frequency
Inside of the scanner (ADF) Brake roller Every 5,000 sheets
Pick roller
Plastic idler roller
Glass
Ultrasonic sensor
Document sensor
Feed roller
Eject roller
Outside of the scanner Scanner Clean when dust and dirt are noticeable.
Touch screen
The inside of the scanner (ADF) needs to be cleaned regularly for every certain number of sheets scanned. The
scanner records the number of sheets scanned so that you can check the number of sheets scanned after you
cleaned it last.
The procedure to check the number of sheets scanned is as follows.
1
On the touch screen, press → [Cleaning & Maintenance] → [Consumable counters].
2
On the [Consumable counters] screen, check the value for [After cleaning].
●
When the background color of the counter is yellow
It is about time to clean the scanner.
● When the background color of the counter is red
It is time to clean the scanner. Clean the scanner.
To use the Software Operation Panel in order to check the value, refer to Settings Related to Sheet Counters
(page 266) .
ATTENTION
Cleaning cycles may vary depending on the condition of the documents. Also, cleaning must be performed
more frequently when the following types of documents are scanned:
● Smooth-faced documents such as coated paper
● Documents with printed text/graphics that almost cover the entire surface
● Chemically-treated documents such as carbonless paper
● Documents containing a large amount of calcium carbonate
● Documents written in lead pencil
Daily Care
116