Machine Components and their Functions
27
Before Usi
n
g the Mac
h
in
e
1
Right and Rear
10
Power Switch
Used to switch the power to the machine on/off.
11
Roll Tray
Load roll media here.
12
Upper Unit
Access the upper unit to clear a paper jam.
13
Upper Unit Releasing Lever Lift this lever to open the upper unit.
No.
Component
Function
14
Document Output Port
Scanned documents exit this port.
15
U-turn Output Guide
Enables scanned documents to return to the front instead of to the rear.
Apply the magnetic area to the attachment on the back of this machine.
Note •
Remove this to use Document Catch Tray (Optional).
16
USB Connector
Used to connect a computer.
17
Maintenance Connector
Do not use this connector because it is available only for our customer
engineers.
18
Option Interface Connector Used to connect Scan Counter Kit, the optional document counter.
19
Output Port
Face up copies and prints exit here.
20
Paper Catch Tray
Receives sheets of copied or printed media. (Optional)
21
Right-side Cover
Open this cover to replace the waste toner bottle or to turn the media
heater switch on/off.
Note •
Open the upper unit, and then open the right-side cover.
22
Waste Toner Bottle
This bottle receives used toner.
23
Media Heater Switch
Switches the media heater on/off.
By switching on the media heater, the paper loaded in the machine can
be dehumidified. Normally, the media heater switch is off.
No.
Component
Function
26
27
28
29
30
20
23
25
24
21
19
15
22
16
17
18
14
Inside
