Loading Paper
47
P
ape
r a
nd O
the
r M
edia
2
Loading Paper in Tray 6 (HCF B1)
The following describes the procedure for loading paper into Tray 6 (HCF B1).
When the machine runs out of paper during copying or printing, a message is displayed
on the touch screen. Add paper according to the displayed instructions. Copying or
printing is automatically resumed when paper is added.
Note
•
Carefully fan the paper before loading it in a tray. Otherwise, the paper may stick together,
resulting in paper jams.
For information on changing the paper size and orientation, refer to "Changing the Paper Size" (P.48).
1
Pull out Tray 6 until it stops.
Important •
While the machine is processing a job, do
not pull out the tray that is being used for the job.
•
To prevent paper jams or erroneous detection of loaded paper in a tray by the machine, do
not add paper on top of any remaining paper in the tray.
2
Load and align the edge of the paper against
the right edge of the tray with the side to be
copied or printed on facing down.
Important •
Do not load paper above the maximum fill
line ("MAX" in the right figure). It may
cause paper jams or machine
malfunction.
3
Push the tray in gently until it stops.
CAUTION
Make sure to pull out the tray slowly. If
the tray is pulled out with too much
force, the tray might possibly hit your
knees or other parts of your body and
cause injuries.
