Fuji Xerox apeosport-iv C2270, Administrator'S Manual

Page: 243 / 673

Setup
241
T
ools
5
„ Name/E-mail Address
Displays the recipient name or e-mail address specified.
„ Subject
Enter a subject using the keyboard displayed.
„
Delete Recipient
Deletes all information for the selected recipient information.
„ Edit
Displays the [Edit Recipient] screen, which allows you to check or change the recipient
selected.
For more information on the [Edit Recipient] screen, refer to "5 Scan" in the User Guide.
„ File Format
Select an output file format.
For more information on the [File Format] screen, refer to "5 Scan" in the User Guide.
„ Resend Attempts
Set whether or not to try sending again if a transmission fails. If you select [On], set the
number of resend attempts and interval.
z
Resend Attempts
Set the transmission retry count from 1 to 5.
z
Resend Interval
Set the transmission retry interval from 30 to 300 seconds.
„ Encryption
Set whether or not to encrypt the e-mail transmission.
Note • To encrypt e-mail transmission, the configuration of S/MIME is required.
• To encrypt e-mail transmission, a certificate is required.
• To enable encryption, select [On] before specifying an address. [On] will be disabled after an
address is specified.
„ Digital Signature
Select whether or not to add digital signature.
Note • To add digital signature, the configuration of S/MIME is required.
• To add digital signature, a certificate is required.
Transfer via FTP (1), Transfer via FTP (2) (ApeosPort Series Models Only)
[Transfer via FTP (2)] will be displayed when [Transfer via FTP (1)] is configured.
Specify where FTP forwarding is to be stored.
„ Address Book
When the server address is registered on the Address Book, you can specify the address
from the Address Book. The specified address appears in the [Transfer via FTP (1)] or
[Transfer via FTP (2)] screen.
For more information on the Address Book, refer to "Add Address Book Entry" (P.244).
„ File Format
Specify an output file format.
For more information on the [File Format] screen, refer to "5 Scan" in the User Guide.
„
Resend Attempts
Set whether or not to try sending again if a transmission fails. If you select [On], set the
number of resend attempts and interval.
z
Resend Attempts
Set the transmission retry count from 1 to 5.
z
Resend Interval
Set the transmission retry interval from 30 to 300 seconds.