Fuji Electric FRENIC-MEGA, Instruction Manual

Page: 66 / 358

3-9
3.4.1 Setting up function codes quickly using Quick Setup -- Menu #0 "Quick Setup" --
Menu #0 "Quick Setup" in Programming mode quickly displays and sets up a basic set of function codes specified beforehand.
Using Menu #10 "User Setting" adds or deletes function codes to/from the set of function codes registered for Quick Setup by
default. The set of function codes registered for Quick Setup is held in the inverter memory (not the keypad). If the keypad on a
particular inverter is mounted on any other inverter, therefore, the set of function codes held in the latter inverter is subject to Quick
Setup.
The set of function codes subject to Quick Setup can be copied with the copy function (Menu #8 "Data Copying").
Performing data initialization (function code H03) resets the set of function codes subject to Quick Setup to the factory default.
For the list of function codes subject to Quick Setup by factory default, refer to Chapter 5 "FUNCTION CODES."
The menu transition in Menu #0 is just like that in Menu #1 "Data Setting" given in the next section.
Basic key operation
Same as the basic key operation for Menu #1 "Data Setting."
3.4.2 Setting up function codes -- Menu #1 "Data Setting" --
Menu #1 "Data Setting" in Programming mode allows you to set up all function codes for making the inverter functions match your
needs.
Table 3.6 Function Code List
Function Code Group Function Description
F codes Fundamental functions Functions concerning basic motor running
E codes
Extension terminal
functions
Functions concerning the assignment of control circuit terminals
Functions concerning the display of the LED monitor
C codes Control functions Functions associated with frequency settings
P codes Motor 1 parameters
Functions for setting up characteristics parameters (such as capacity)
of the 1st motor
H codes High performance functions
Highly added-value functions
Functions for sophisticated control
A codes Motor 2 parameters
Functions for setting up characteristics parameters (such as capacity)
of the 2nd motor
b codes Motor 3 parameters
Functions for setting up characteristics parameters (such as capacity)
of the 3rd motor
r codes Motor 4 parameters
Functions for setting up characteristics parameters (such as capacity)
of the 4th motor
J codes Application functions 1 Functions for applications such as PID control
d codes Application functions 2 Functions for applications such as speed control
U codes Application functions 3 Functions for applications such as customizable logic
y codes Link functions Functions for controlling communication
o codes Option functions Functions for options
(Note)
(Note) The o codes are displayed only when the corresponding option is mounted on the inverter. For details, refer to the instruction manual
of the corresponding option.
„
Function codes requiring simultaneous keying
To modify the data of function code F00 (data protection), H03 (data initialization), or H97 (clear alarm data), simultaneous keying
of "
+
keys" or " +
keys" is required.
„
Changing, validating, and saving function code data when the invert is running
Some function codes can be modified when the inverter is running. The modification may or may not take effect immediately. For
details, refer to the "Change when running" column in Chapter 5, Section 5.1 "Function Code Tables."