Fuji Electric FRENIC-MEGA, Instruction Manual

Page: 58 / 358

3-1
Chapter 3 OPERATION USING THE KEYPAD
3.1 LED Monitor, LCD Monitor, and Keys
The keypad allows you to start and stop the motor, view various data including maintenance information and alarm information,
configure function codes, monitor I/O signal status, copy data, and calculate the load factor.
Table 3.1 Overview of Keypad Functions
Item Monitors and Keys Functions
Monitors
Five-digit, 7-segment LED monitor which displays the following according to the operation
modes:
„
In Running mode: Running status information (e.g., output frequency, current, and
voltage)
„
In Programming mode: Same as above.
„
In Alarm mode: Alarm code, which identifies the alarm when the protective function
is activated.
LCD monitor which displays the following according to the operation modes:
„
In Running mode: Running status information
„
In Programming mode: Menus, function codes and their data
„
In Alarm mode: Alarm code, which identifies the alarm when the protective function
is activated.
Indicator indexes
In Running mode, these indexes show the unit of the number displayed on the 7-segment LED
monitor and the running status information on the LCD monitor. For details, see the next page.
7-segment LED monitor
Program key
Indicator indexes
STOP key
RUN key
(forward)
RUN key
(reverse)
Reset key
Shift key
LED lamp
LCD monitor
DOWN key
UP key Function/Data key
Remote/Local key