5-84
Ch
ap
. 5
FUNCTION C
O
DES
E codes
Example of Operation Time Scheme
Alternatively, you may use the integrated sequence by which some of the actions above are automatically
performed by the inverter itself. For details, refer to the description of
ISW50
and
ISW60
.
Cancel PID control --
Hz/PID
(Function code data = 20)
Turning this terminal command ON disables the PID control.
If the PID control is disabled with this command, the inverter runs the motor with the reference frequency manually set by
any of the multi-frequency, keypad, analog input, etc.
Terminal command
Hz/PID
Function
OFF
Enable PID control
ON
Disable PID control/Enable manual frequency settings
(
Refer to the descriptions of J01 through J19 and J56 through J62.)
Summary of Contents for FRENIC-MEGA
Page 36: ...2 6 Unit inch mm Refer to Section 2 3 3 9...
Page 356: ...MEMO...
