419-01B-19 Anti-Theft — Passive 419-01B-19
GENERAL PROCEDURES
E3811 EN 07/2001 2002 Bantam
Key Programming Switch State Control
NOTE:
The Spare Key Programming Switch is a
WDS programmable switch which provides the
capability to enable / disable the normal cus-
tomer Spare Key Programming Procedure de-
tailed in the owner's manual (customer scan
program a spare ignition key by cycling two pro-
grammed ignition keys and then cycling the new
key). This programmable switch is provided as a
convenience for rental company fleets or other
fleet purchasers who may not want the Spare
Key Programming procedure available to the
vehicle driver.
NOTE:
The default setting on delivery of all new
vehicles is ENABLE.
1. Insert a programmed ignition key into the
ignition lock cylinder and turn the lock
cylinder from the OFF position to the RUN
position.
2. Using WDS select powertrain control
module (PCM) from the menu.
3. Select Security Access. For additional
information,
section
4. Using WDS select Spare Key Programming
Switch from the menu. Follow the on-
screen directions.
FORD BANTAM
PAGES FROM MANUAL
