303-01D-45
Engine — 1.8L Diesel - Endura DE
303-01D-45
IN-VEHICLE REPAIR (
CONTINUED
)
E6447 EN
09/2001 2002 Bantam
20. Insert the timing tool in the camshaft
groove. If it is not possible to insert the
timing tool into the slot on the camshaft,
repeat the adjustment from step 10.
21.
CAUTION: To avoid engine damage
make sure that the pointer is within
range 'A'.
Check the position on the automatic timing
belt tensioner.
• If the pointer is in range A: continue with
the next step.
• If the pointer is not in range A:
repeat the adjustment procedure from step 10
22. Remove the special tools and tighten the
blanking plug to 24 Nm.
23. Seal the parting line between the bearing
cap and the cylinder head on both sides
with a thin bead of sealer (SPM-4G9112-
F/G).
24. NOTE:
Clean the cylinder head gasket and
check it for damage. Only renew if damaged.
If it is in good condition, it can be used
several times.
NOTE:
Before fitting the gasket, coat it lightly
with engine oil.
Fit the cylinder head cover.
1. Screw in the bolts.
2. Attach the PCV hoses.
