211-00-12
Steering System — General Information
211-00-12
GENERAL PROCEDURES (
CONTINUED
)
All vehicles
5. NOTE:
The vehicle must be raised with the
wheels clear of the floor to allow the steering
wheel to be rotated from lock to lock.
Raise and support the vehicle until the
wheels are clear of the floor. For additional
information,
6.
CAUTION: Do not continuously crank
the engine for more than 30 seconds,
as damage to the starter motor may
result.
CAUTION: Do not hold the steering
wheel against the full lock stops for
more than five seconds, as damage to
the steering pump may result.
While cranking the engine for no more than
30 seconds, turn the steering wheel from
lock to lock.
• With the aid of another technician, add
fluid to the reservoir until the level remains
constant.
7. Turn the ignition switch to the OFF position.
8. Fill the power steering fluid reservoir to the
MAX mark with power steering fluid.
All except vehicles with diesel engine
9. Connect the CKP electrical connector.
Refer to the Wiring Diagram Section 700-06
for schematic and electrical information.
E3219 EN
07/2001 2002 Bantam
