501-14-3
Handles, Locks, Latches and Entry Systems
501-14-3
DIAGNOSIS AND TESTING
E6786 EN
08/2001 2002 Bantam
Locks, Latches and Entry Systems
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of
mechanical or electrical damage.
Visual Inspection Chart
Mechanical
Electrical
• Misaligned door(s)
• Misaligned hood
• Door latch(s)
• Actuating rod(s)
• Exterior door
handle(s)
• Door latch remote
control(s)
• Door lock cylinder(s)
• Cable(s)
• Door latch actuator(s)
• Battery
• Fuse(s)
• Loose or corroded
electrical connector(s)
• Wiring harness
3. If an obvious cause for an observed or
reported concern is found, correct the cause
(if possible) before proceeding to the next
step.
4. If the cause is not visually evident, verify the
symptom and refer to WDS to diagnose the
system.
