501-11-28
Glass, Frames and Mechanisms
501-11-28
REMOVAL AND INSTALLATION (
CONTINUED
)
7. NOTE:
Discard the first 100 mm of PU
adhesive as this may have a reduced working
time.
NOTE:
To avoid water leaks, any breakage in
the continuous bead should be overlapped by
20 mm.
Apply the PU adhesive in a continuous
bead of between 8 and 10 mm height to the
windshield opening flange along the bond
line.
8. NOTE:
Firmly and evenly press in position.
With the aid of another technician, use
suction cups to install the windshield.
9. Should the ambient temperature fall below
10°C use a hot air gun at a distance of
approximately 50 mm from the surface and
apply warm air (25°C) continuously for 15
minutes (inside or outside the vehicle).
10. Install the headliner.
• Remove the spacers.
11. Install the A-pillar trim panels on each side.
E6783 EN
08/2001 2002 Bantam
FORD BANTAM
PAGES FROM MANUAL
