211-00-9
Steering System — General Information
211-00-9
GENERAL PROCEDURES (
CONTINUED
)
All vehicles
5. Lower the vehicle.
Vehicles with diesel engine
6. Disconnect the fuel injection pump electrical
connector.
1. Pull out the locking handle.
2. Disconnect the electrical connector.
All vehicles
7. NOTE:
When filling the power steering fluid
reservoir, make sure the power steering fluid
is clean and not agitated prior to use. The
fluid should be poured slowly into the
reservoir to minimize the possibility of
aeration. The fluid level should be checked
with the fluid cold.
Fill the power steering fluid reservoir to the
MAX mark with power steering fluid.
8.
CAUTION: Do not continuously crank
the engine for more than 30 seconds,
as damage to the starter motor may
result.
Turn the ignition switch to the START
position, with the aid of another technician
add 2.2 litres of clean power steering fluid.
9. When all the fluid has been used, turn the
ignition switch to the OFF position.
10. Raise and support the vehicle.
For additional information,
11. Remove the blanking cap from the power
steering fluid cooler return line and connect
the line from the power steering gear.
E3217 EN
07/2001 2002 Bantam
