303-01D-128
Engine — 1.8L Diesel - Endura DE
303-01D-128
ASSEMBLY (
CONTINUED
)
E6005 EN
09/2001 2002 Bantam
22. Fit the sump.
• Locate the sump in position with a new
gasket and screw in the bolts (x 14) finger
tight.
• Using a steel straightedge, align the
sump so that it is flush with the mating
face of the oil seal housing.
23. Tighten the oil pan bolts.
24.
CAUTION: The sealing lip of the oil
seal and the crankshaft sealing
surface must be free of oil.
NOTE:
The support ring must sit in the oil seal.
Install the crankshaft rear oil seal housing.
1. Place the new crankshaft oil seal
housing, together with the integrated oil
seal, in the installation position.
2. Screw in the bolts finger tight.
3. Fit the aligner and center the oil seal
housing on the crankshaft.
4. Crankshaft
5. Remove the support ring.