211-00-8
Steering System — General Information
211-00-8
GENERAL PROCEDURES
Power Steering System Flushing (13 416 1)
Special Tool(s)
Remover, Oil Cooling Pipe
307-242 (17-049)
All vehicles
1. Raise and support the vehicle. For
additional information,
2. Using the special tool, (if required)
disconnect the power steering fluid return
line.
1. Insert the special tool into the quick-
release coupling.
2. Slide the special tool along the pipe to
release the locking tangs.
• Allow the fluid to drain into a suitable
container.
3. Attach a tube of suitable length to the fluid
return line.
1. Using a suitable blanking cap, cap the
end of the fluid cooler line.
2. Attach a tube of suitable length to the
fluid cooler to power steering gear line
and place the other end into a suitable
container.
All except vehicles with diesel engine
4. Disconnect the crankshaft position sensor
(CKP) electrical connector.
Refer to the Wiring Diagram Section 700-06
for schematic and electrical information.
E3217 EN
07/2001 2002 Bantam
