412-00-52
Climate Control System — General Information
412-00-52
GENERAL PROCEDURES
Air Distribution System Cleaning
General Equipment
Spray gun with hose
Material
Specification
Odor eliminating agent
(240 ml) (TOX Number
142040)
All vehicles
1.
WARNING: Avoid contact with eyes
and skin; wear gloves and respiratory
protection. Ensure that you perform
this operation in a well ventilated
room. Keep all vehicle doors and
windows open for the duration of the
operation. Do not inhale vapors
under any circumstances. Do not
smoke and avoid open fire and
unprotected light sources.
NOTE:
Precisely locate the musty or damp odor.
The odor eliminating agent can remove deposits
in the heater housing but cannot prevent
odorous that are distributed by the ventilation
system, for example those caused by damp
carpets.
Disconnect the low pressure switch
connector.
2. Turn on the ignition.
3. NOTE:
All ventilation nozzles must be open.
Open all ventilation nozzles, set the
temperature switch to maximum heat, set
the heater motor switch to the highest
position and set the ventilation to "fresh air".
4. Start the engine and let it warm up to
operating temperature.
5. To dry out the system, switch off the air
conditioning system and ventilate the
vehicle for approx. 15 minutes.
6. Switch off the engine.
7. Remove the blower motor. For additional
8. Fill the spray gun with the odor eliminating
agent (240 ml).
E4466 EN
07/2001 2002 Bantam
