417-01-28
Exterior Lighting
417-01-28
DIAGNOSIS AND TESTING (
CONTINUED
)
CONDITIONS
DETAILS/RESULTS/ACTIONS
H2: CHECK THE CIRCUIT TO STOP LAMP SWITCH FOR OPEN
1
.
Stop lamp switch
C50
2
.
3
Measure the voltage between stop lamp
switch, connector C50, circuit 14-LG23
(VT/WH), harness side and ground.
• Is battery voltage indicated?
Yes
GO TO
H3
No
REPAIR the open circuit(s) between fuse
F13 and stop lamp switch, by using the wir-
ing diagrams. TEST the system for normal
operation.
H3: CHECK THE STOP LAMP SWITCH FOR PROPER FUNCTION
1
Connect a jumper wire between stop lamp
switch, connector C50, circuit 14-LG23
(VT/WH) and circuit 14S-LG1 (VT/BK), harness
side.
• Are the stop lamps illuminated?
Yes
INSTALL a new stop lamp switch. TEST the
system for normal operation.
No
REPAIR the open circuit(s) between stop
lamp switch and splice S37, by using the
wiring diagrams. TEST the system for nor-
mal operation.
PINPOINT TEST I: ONE OR MORE STOP LAMPS ARE INOPERATIVE
CONDITIONS
DETAILS/RESULTS/ACTIONS
I1: DETERMINE THE FAULT CONDITION
1
.
2
Depress the brake pedal.
E6752 EN
07/2001 2002 Bantam
FORD BANTAM
PAGES FROM MANUAL