303-01D-113
Engine — 1.8L Diesel - Endura DE
303-01D-113
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (
CONTINUED
)
E6008 EN
09/2001 2002 Bantam
11. Pull off the flange of the camshaft timing
belt pulley using a proprietary two-legged
puller.
• Take out the Woodruff key.
12.
CAUTION: Slacken the nuts of the
remaining bearing caps evenly a turn
at a time.
Remove the camshaft.
1. Remove camshaft bearing caps nos. 2
and 4.
2. Slacken the nuts of the remaining
camshaft bearing caps evenly a turn at a
time. Remove the bearing caps, bearing
shells and camshaft with the oil seal and
put them down in order.
3. Remove the vacuum pump plunger.
13. NOTE:
Put the valve tappets down in order.
Remove the valve tappets with the
adjusting shims.
14. Detach the parts on the right-hand side of
the cylinder head.
1. Coolant connector
2. Engine lifting eye
3. Coolant hose
4. Lower inlet manifold
