419-01B-22 Anti-Theft — Passive 419-01B-22
GENERAL PROCEDURES
E3812 EN 07/2001 2002 Bantam
Anti-Theft Security Access (33 004 0)
NOTE:
This procedure is utilized to obtain pas-
sive anti-theft system (PATS) security access.
PATS security access must be granted to erase
ignition key codes or enable/disable the spare
key programming switch. This procedure in-
vokes an inherent 10 minute time delay prior to
granting security access during which WDS
must remain connected to the vehicle. Once se-
curity access has been granted, a security ac-
cess command menu is displayed which offers
various command options.
NOTE:
Once security access has been granted,
multiple security access commands should be
executed (if necessary) prior to exiting the
command menu. This avoids repeating the pro-
cedure and thus avoids any additional 10 minute
time delay.
1. Use WDS to obtain anti-theft security
access.
2. After the 10 minute security access
procedure has been completed, a new
menu will be displayed with command
options. Select the function as required
before exiting out of this menu. (do not
select more functions than the procedure
calls for). Once exited out of this menu, the
security access procedure must be carried
out again to carry out additional commands.
FORD BANTAM
PAGES FROM MANUAL
