Foma M702iG, Manual

Page: 59 / 433

52
Ma
king
/Answ
e
ring
Calls
Making a Call
a
Enter a phone number
• Up to 64 digits can be entered. As more than 64 digits are entered, the first
entered digits will be deleted.
• Start from the area code even for a local call.
•
i
[Store] : Go to Step 2 (P97) in "Saving Contacts to the Phonebook from
Received Calls or Dialed Calls".
■ To make a call to a fixed line phone
■ To make a call to a mobile phone
090 - XXXX - XXXX/080 - XXXX - XXXX
■ To make a call to a PHS
070 - XXXX - XXXX
b
o
/
c
A ringing tone sounds from the Earpiece, and the Dialing screen with
"Voice Calling..." displayed opens until the other party answers the call.
•
i
[Swap]: Use the multitask function.
→
P258
c
p
to terminate the call
• If you hear the voice guidance of Caller ID Request, make a call again sending the Caller ID.
• When the phone number cannot be dialed due to poor signal reception, a message of "Call Failed" appears. Press
h
[Retry] to redial the number, and when ringing starts, an alarm sounds.
• You cannot switch to a video call during a voice call using this FOMA handset.
• Closing the FOMA handset during a call terminates the call. However, when using the miniUSB Stereo Headset M01
(optional) or In-Car Handsfree, etc., the call will not be terminated when the handset is closed.
• When the other party terminates the call, the call end tone sounds, "pilolo", from the Earpiece.
• If a charge starts during a call, the charge start tone sounds from the Earpiece.
• When the battery becomes low during a call, the low battery alert, "pico", sounds from the Earpiece every 30
seconds. You can keep talking,; however, the call will be terminated momentarily when the handset power is
automatically turned off.
• When you call a special number such as "113", "114", "171", or "1419", this FOMA handset behaves as follows:
- Even if the call is connected to the network and you can hear the voice guidance, the Dialing screen stays open.
- Even if you send push signals(DTMF) by pressing Dial Keys, the entered digits do not appear on the screen.
- After operations are finished and the call is disconnected from the network, a message of "Call Failed" may
appear.
■
To correct an entered phone number
To delete an entered digit, use
a
to move the cursor to the right of the digit and press
C
.
To add a digit, use
a
to move the cursor to the position and enter the digit with the Dial Keys.
■ Screen display during dialing
The other party's name appears if the other party is saved in the Phonebook. However, when a call is made to the
other party that has been set "Secret Data" to "Hide" and set the Phonebook entry to Secret, the phone number is
displayed.
Phone number
entry screen
Area Code - City Code - Phone Number
Voice Call screen
Making
a Call