Foma M702iG, Manual

Page: 419 / 433

25
b
Enter " ユーザー名 (User Name)" and " パ
スワード (Password)"
y
Click [ ダイヤル
(Dial)]
The access point will be connected.
• To connect to "mopera U" or "mopera", the " ユーザー名
(User Name)" and "
パスワード
(Password)" fields can be
left unfilled.
• The communication speed displayed on the PC may
be different from the actual communication speed.
Disconnecting Communication
Exiting the Internet browser may not terminate
the connection. Perform the following steps to
terminate the connection securely.
a
Click the dial-up icon in
the task tray of the PC
b
Click [
切断
(Disconnect)]
The communication will be terminated.
■ 64K Data communication settings
This section describes precautions and different
steps from the packet communication settings
when 64K data communication connection is set up
without using the FOMA PC configuration software.
64K Data communication dial-up connection
and TCP/IP settings
The settings are the same as for packet
communication (P19), however, note the following:
• The APN is not required to set up for 64K data
communication. Enter the phone number of the
access point provided by your ISP for the dial-up
connection destination (enter "*8701" to connect
to "mopera U", and enter "*9601" to connect to
"mopera").
• Configure " 発信者番号通知／非通知の設定
(Caller ID notification)" and settings using AT
commands of your own choice (Caller ID must be
displayed to connect to "mopera U").
• For detailed information on settings, contact your
ISP.
Connecting/Disconnecting
Use the same operations as for packet
communication. Perform the operations on P25.