Foma M702iG, Manual

Page: 24 / 433

17
Conte
n
ts/P
reca
ution
s
Eas
y
Se
arch
/
WARNING
Do not put the FOMA handset in the place where it could be affected by an
expanded airbag, e.g. on the dashboard.
●
If the airbag expands, the FOMA handset could hit you and others, causing accidents
such as injury and the FOMA handset could get malfunction or damaged.
CAUTION
Itching, rash or eczema may be caused depending on your physical
conditions or predisposition. If an abnormality occurs, stop using the FOMA
handset immediately, and then seek medical attention.
●
Metals are used for the following parts:
Electronic devices in some
types of cars can be affected
by use of the FOMA handset.
●
For safety's sake, do not use the
FOMA handset in such cars.
Be careful not to catch
anything inside the fold of the
FOMA handset when you close
or open it.
●
You may be accidentally injured
or device may fail.
Some parts of the FOMA
handset are made of glass. If
the glass is damaged as by
dropping the handset, do not
touch the broken glass.
●
Injury may result.
Use the Bluetooth function
only in Japan.
●
The Bluetooth function of the
FOMA handset is certified in
compliance with the wireless
standard of Japan. You may be
punished if you use Bluetooth
overseas.
Do not put anything but a UIM
in the FOMA Card Slot and
microSD Memory Card Slot.
Keep water, foreign objects
such as electrical conductors,
volatile liquids, etc., out of the
FOMA handset.
●
Putting foreign objects into the
FOMA handset could cause fire,
electric shock or equipment
failure.
Do not place magnetic cards or
the like near the FOMA handset.
●
Information on magnetic cards
such as cash cards, credit cards,
telephone cards and floppy disks
may be deleted.
Do not swing the FOMA
handset around.
●
If you swing the FOMA handset
around by its lanyard, someone
could get hurt or the device could
be damaged.
Part Material Surface Finish
M Logo Mark (Sub-display side) Nickel Chrome Plating
M Logo Mark (Display side) Nickel Chrome Plating
Dial Keys Phosphoric Bronze Nickel base + Tin cobalt plating
microSD Memory Card Slot Phosphoric Bronze Nickel Plating Base + Gold Plating
Rear Cover Latch PC (Polycarbonate) Tin Plating
Safety Pr
e
cautions