Foma M702iG, Manual

Page: 405 / 433

11
Uninstall the old version of W-TCP environment
configuration software from the "
プログラム追加と
削除 (Add or Remove Programs)" (for Windows
2000, "
アプリケーションの追加と削除
(Add or
Remove Applications)", then install the FOMA PC
configuration software.
If a warning indicating that an old version of
FOMA data communication configuration
software has been installed appears
Click [OK] to uninstall the FOMA data
communication configuration software
automatically. After the un-installation, the FOMA
PC configuration software installation resumes.
If a confirmation indicating to cancel the
wizard appears when clicking [
キャンセル
(Cancel)] or [
いいえ
(No)]
Click [ 完了 (Finish)] to finish the installation. If re-
installing, perform the installation steps from the
beginning.
■ Checking the FOMA PC Configuration
Software Version
On the FOMA PC configuration software operation
screen, click "
メニュー (Menu)"
y
" バージョン情報
(Version)" to open the version information screen.
Configuring
Communication Settings
This section describes steps to set up packet
communication/64K data communication using
the FOMA PC configuration software.
• Check that the FOMA handset and the PC are
connected properly before configuring the settings.
→ P5
Launching the FOMA PC Configuration
Software
Launch the FOMA PC configuration software
installed on the PC. The following can be
configured from the operation screen when the
FOMA PC configuration software is launched:
■ Packet communication settings using " かんた
ん設定 (Easy Settings)" → P12
■
64K data communication settings using "
かん
たん設定 (Easy Settings)" → P14
■
Optimizing and changing the transmission
capability of data communication using "W-
TCP Settings"
→
P16
■ APN settings for packet communication using
"APN Settings"
→
P17
<Example: For Windows XP>
a
Click " スタート (Start)"
y
" すべてのプロ
グラム (All Programs)"
y
"FOMA PC 設定
ソフト (FOMA PC configuration
Software)"
y
"FOMA PC 設定ソフト
(FOMA PC configuration Software)"
The FOMA PC configuration software launches
and the operation screen opens.
■ For Windows 2000
Click " スタート (Start)"
y
" プログラム
(Programs)"
y
"FOMA PC 設定ソフト (FOMA
PC configuration Software)"
y
"FOMA PC 設定
ソフト (FOMA PC configuration Software)"
Specifying a COM Port
When performing data communication via
Bluetooth connection, you need to specify the
COM port number of the PC under "
通信設定
(Communication Settings)" of the FOMA PC
configuration software.
• This operation is usually not required for USB
connection. Perform this operation if you want to
specify the COM port.
a
Check the COM port assigned to the
FOMA handset
Checking the COM port → P7, P8
b
From the FOMA PC configuration
software operation screen, click
" メニュー (Menu)"
y
" 通信設定
(Communication Settings)"
Continued on the next page