Foma M702iG, Manual

Page: 411 / 433

17
c
Set to a dial-up connection to
optimize
y
Click [ 実行 (Execute)]
• Set to a dial-up connection to cancel optimizing.
d
Follow the instructions on the message
to reboot the PC to enable the
optimization
The optimization of the system settings will
become enabled after the PC reboots.
For Windows 2000
<Example: Optimizing>
a
Start the FOMA PC configuration
software
y
Click [ W-TCP設定 (W-TCP
settings)]
■ To operate from the task tray of the PC
Click .
b
On the W-TCP settings screen, click [
最
適化を行う
(Optimize)]
■
To cancel optimization
On the W-TCP settings screen, click [ 最適化を
解除する
(Cancel Optimization)]
c
Follow the instructions on the message
to reboot the PC to enable the
optimization
The optimization of the system settings will
become enabled after the PC reboots.
Setting APN
Set the access point (APN) for packet
communication.
Up to 10 APN can be set, and a cid of 1 to 10 can
be assigned.
Use a cid to specify the access point for packet
communication. The default cid1 is registered
"mopera.ne.jp" for APN of "mopera" and cid3 is
registered "mopera.net" for APN of "mopera U",
when you set cid, 2 or a number between 4 and
10.
• Check that the FOMA handset and the PC are
connected properly before configuring the settings.
→ P5, P8
a
Start the FOMA PC configuration
software
y
Click [
接続先 (APN) 設定
(APN settings)]
b
Click [OK] on the Download FOMA
handset settings screen
The information on the APN that has been accessed
and registered by the connected FOMA handset will
be read.
c
Configure APN
• To set the connection method, click [ 編集 (Edit)]
y
[ 詳細設定 (Advanced Settings)] and select a
connection method.
Editing/Deleting/Adding an APN
■ To edit a registered APN
Select an APN from the list
y
Click [ 編集 (Edit)]
■
To delete a registered APN
Select APN from the list
y
Click [ 削除 (Delete)]
• APN's registered for cid 1 and cid 3 cannot be
deleted (Even if you select number (cid) 1 or 3 and
click [
削除 (Delete)], it will not be deleted, and
number (cid) 1 reverts to "mopera.ne.jp" and 3
reverts to "mopera.net").
■ To add an APN
Click [
追加
(Add)]
Saving to a File
You can make a backup of saved APN settings
on the FOMA handset or save APN settings that
are being edited.
a
Click " ファイル (File)"
y
" 名前を付けて保
存 (Save as)" or " 上書き保存 (Save)"
Reading from a File
You can re-edit the APN settings saved on the
PC or write the settings to the FOMA handset.
a
Click " ファイル (File)"
y
" 開く (Open)"