Foma M702iG, Manual

Page: 426 / 433

32
AT+CPAS
[=?]
Display FOMA handset state. Executing “AT+CPAS”
displays in the format of
“+CPAS : <n>”.
n=0 : Available to set AT
commands.
n=1 : Unavailable to set AT
commands.
n=2 : Unknown (Response
to AT commands is not
guaranteed).
n=3 : Available to set AT
commands even
during incoming.
n=4 : Available to set AT
commands even
during a call.
AT+CPAS
+CPAS : 0
OK
AT+CPAS=?
+CPAS : (0-4)
OK
AT+CPIN=“pin”/
AT+CPIN=“puk”,
“pin”
[?]
Command to enter the PIN1
code or PUK code for UIM. Enter the SIM PIN for "pin"
and the PUK for "puk".
Execute “AT+CPIN?” then
“+CPIN : <n>” is displayed.
n=READY
: Authenticated.
n=SIM PIN
: Waiting for input.
n=SIM PUK
: Waiting for PUK code
entry.
(+CPIN : SIM PIN
status)
AT+CPIN=“1234”
OK
(+CPIN : SIM PUK
status)
AT+CPIN=“12345678”,
“1234”
OK
AT+CPUC
[=?]
Overwrite the currency table
registered in the UIM. AT+CPUC=<Currency>,<pp
u>[,<passwd>]
Currency: Currency
ppu: Packet piece unit
Passwd: PIN2 code
* This is a string parameter,
and should be put in ""
when entered.
AT+CPUC="YEN","0.2",
"0000"
OK
AT+CPUC?
+CPUC : "YEN","0.2"
OK
AT+CR=<n>
[&F]
[?] [=?]
Set whether to display the
bearer (communication type)
before “CONNECT” is displayed
when 64K data communication
is connected. n=0 (default)
: Hide.
n=1 : Display in the format of
“+CR : <serv>”.
serv=GPRS : Packet
communication.
serv=SYNC : 64K data
communication.
AT+CR=1
OK
ATD
＊
99
＊＊＊
1#
+CR : GPRS
CONNECT
AT+CRC=<n>
[&F]
[?] [=?] Set to use extend result code for
incoming connection. n=0 (default)
: Not to use +CRING.
n=1 : Use +CRING: <type>.
AT+CRC=0
OK
AT Command Overview Parameters/Description Command Examples
Continued on the next page