Foma M702iG, Manual

Page: 406 / 433

12
c
Select " COMポート指定 (Specify COM
port)"
y
Click the "COM:" field to set the
COM port number assigned to the FOMA
handset
• A COM port number can be specified between 1
and 99.
d
Click [OK]
Setting completes.
Setting Packet Communication Using
Easy Settings
Packet communication is a communication
method whose charges are based on the amount
of data exchanged. It allows data communication
at a maximum speed of 384Kbps for receiving
and 64Kbps for sending. It is recommended that
you use "mopera U" that handles broadband
connection options or international roaming to
connect to the Internet using the FOMA handset
(separate subscription is required). You can
perform only packet communication using
international roaming. Note that packet
communication fees under international roaming
differ from those in Japan. If you want to connect
to the Internet now, "mopera" is convenient.
This section describes the steps to set up a USB
connection as an example.
Using "mopera U" or "mopera"
a
On the FOMA PC configuration software
screen, click [
かんたん設定
(Easy
Settings)]
b
Select " パケット通信 (Packet
Communication)" and click [ 次へ (Next)]
c
Select "
『mopera U』への接続
(Connect
to mopera U)" or "
『mopera』への接続
(Connect to mopera)"
y
Click [
次へ
(Next)]
■ If you select " 『mopera U』への接続
(Connect to mopera U)", a screen to inquire
whether you are a subscriber to "mopera U"
appears. Click [
はい (Yes)] if you are a
subscriber and continue with the settings.
d
Click [OK]
The APN settings will be downloaded from the
FOMA handset. Please wait.
■
For a Bluetooth Connection
The confirmation may be displayed depending
on the FOMA handset connection settings.
Press
h
[Accept] to connect.
e
Enter a connection name in the " 接続名
(Connection Name)" field
y
Select [ 接続
方式 (Connection Method)] ("PPP 接続
(PPP Connection)"/"IP 接続 (IP
Connection)"
y
Select " 発信者番号通知
を行う (Show Caller ID)"
y
Click [ 次へ
(Next)]
• The following half-pitch characters cannot be
entered in the " 接続名 (Connection Name)" field.
￥
/:
＊
?!<>
│
"
• To connect to "mopera U", select " 接続方式
(Connection Method)" to "IP 接続 (IP Connection)".
When using in Japan, you can select any " 接続方式
(Connection Method)".
To connect to "mopera", select "PPP
接続 (PPP
Connection)".
• To connect to "mopera U" or "mopera", Caller ID
must be sent. Do not select "
発信者番号通知を行わ
ない (Hide Caller ID)".
• If using overseas, select "NW サービスに従う
(Follow the NW Service)" and on the FOMA
handset, operate
c y
(Network Services)
y
"Caller ID Notification"
y
"Change Notification
Setting" to set whether to show your Caller ID.
■ For a Bluetooth Connection
Check that the name displayed under " モデム
名 (Modem Name)" is correct by referring to
the instruction manual for your PC or the
Bluetooth adapter connected to the PC.
Continued on the next page