Foma M702iG, Manual

Page: 408 / 433

14
k
Set " 最適化を行う (Optimize)" to
y
Click [ 次へ (Next)]
■
If already optimized
A conformation to optimize does not appear.
Go to Step 12.
l
Check the settings
y
Click [
完了
(Finish)]
• If "
デスクトップにダイヤルアップのショートカッ
トを作成する (Create a shortcut to dial-up on the
desktop)" is set to , a shortcut to the dial-up
connection will be created on the desktop.
■
To change settings
Click [ 戻る (Back)].
m
Click [OK]
Setting completes.
■
If the optimization setting was changed
You need to restart the PC. Click " はい (Yes)"
on the screen to reboot.
Setting 64K Communication Using
Easy Settings
64K data communication is a communication
method whose charges are based on the
connection time. It allows a maximum speed of
64Kbps to transfer data.
It is recommended that you use "mopera U" that
handles broadband connection options or
international roaming to connect to the Internet
using the FOMA handset (separate subscription
is required). You can perform only packet
communication using international roaming.
Note that packet communication fees under
international roaming differ from those in Japan.
If you want to connect to the Internet now,
"mopera" is convenient.
This section describes the steps to set up a USB
connection as an example.
Using "mopera U" or "mopera"
a
On the FOMA PC configuration software
screen, click [
かんたん設定
(Easy
Settings)]
b
Select " 64Kデータ通信 (64K Data
Communication)" and click [ 次へ (Next)]
c
Select "
『mopera U』への接続
(Connect
to mopera U)" or "
『mopera』への接続
(Connect to mopera)"
y
Click [
次へ
(Next)]
■
When selecting
"『mopera U』への接続
(Connect to mopera U)"
A screen to confirm whether you are a
subscriber to "mopera U" appears. Click [
はい
(Yes)] if you are a subscriber and continue with
the settings.
d
Enter a connection name in the " 接続名
(Connection Name)" field
y
Select " 発信
者番号通知を行う (Show Caller ID)"
y
Click [ 次へ (Next)]
• The following half-pitch characters cannot be
entered in the " 接続名 (Connection Name)" field.
￥
/:
＊
?!<>
│
"
• Select "FOMA M702iG" for the " モデムの選択
(Select the modem)" field.
• To connect to "mopera U" or "mopera", Caller ID
must be sent. Do not select "
発信者番号通知を行わ
ない (Hide Caller ID)".
■ For a Bluetooth Connection
Check that the name displayed under "
モデム
名 (Modem Name)" is correct by referring to
the instruction manual for your PC or the
Bluetooth adapter connected to the PC.
e
Select any users under "
使用可能ユー
ザーの選択
(Select a permitted user)"
y
Click [
次へ
(Next)]
To connect to "mopera U" or "mopera", the " ユー
ザー名 (User Name)" and " パスワード
(Password)" fields can be left unfilled.
f
Check the settings
y
Click [
完了
(Finish)]
• If " デスクトップにダイヤルアップのショートカッ
トを作成する
(Create a shortcut to dial-up on the
desktop)" is set to , a shortcut to the dial-up
connection will be created on the desktop.
■ To change settings
Click [ 戻る (Back)].
g
Click [OK]
Setting completes.