Falcon
M-Class
| User Guide
251
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously
saved values.
Add New IGMP VLAN:
Click to add new IGMP VLAN. Specify
the VID and configure the new entry. Click "Save". The
specific IGMP VLAN starts working after the corresponding
static VLAN is also created.
Refresh
: Refreshes the displayed table starting from the "VLAN" input
fields.
<<:
Updates the table starting from the first entry in the VLAN Table,
i.e. the entry with the lowest VLAN ID.
>>:
Updates the table, starting with the entry after the last entry
currently displayed.
Note: by clicking on “Add New IGMP VLAN”, we get the following displsy:
Refer to previous table for terminology
4.18.3
IGMP Snooping Port Group Filtering Configuration
Figure 4-141: IGMP Snooping Port Group Filtering Configuration
Summary of Contents for Falcon Gen-3 M-Class
