Falcon
M-Class
| User Guide
349
4.24
Loop Guard
This section allows the user to inspect the current Loop Guard (Loop protection) configurations,
and possibly change them as well
.
Figure 4-208: Loop Guard Configuration
Table 4-181: Loop Guard Configuration Parameters
General Settings Global Configuration
Enable Loop
Guard
Controls whether loop guard is enabled (as a whole).
Transmission
Time
The interval between each loop guard PDU sent on each
port. valid values are 1 to 10 seconds. Default value is 5
seconds
Shutdown Time
The period (in seconds) for which a port will be kept disabled
in the event of a loop is detected (and the port action shuts
down the port).
Valid values are 0 to 604800 seconds (7 days). A value of
zero will keep a port disabled (until next device restart).
Default value is 180 seconds.
Port Configuration
Port
The switch port number of the port.
Enable
Controls whether loop guard is enabled on this switch port.
Summary of Contents for Falcon Gen-3 M-Class
