Falcon
M-Class
| User Guide
100
Figure 4-53: QoS Egress Port Scheduler and Shapers Configuration
Table 4-51: QoS Egress Port Scheduler & Shapers Parameters
Scheduler Mode
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on
this switch port.
Queue Shaper
Enable
Controls whether the queue shaper is enabled for this queue on this switch
port.
Queue Shaper
Rate
Controls the rate for the queue shaper. The default value is
500
. This value
is restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted
to 1-3300 when the "Unit" is "Mbps".
Queue Shaper
Unit
Controls the unit of measure for the queue shaper rate as "kbps" or
"Mbps". The default value is "kbps".
Queue Shaper
Excess
Controls whether the queue is allowed to use excess bandwidth.
Queue
Scheduler
Weight
Controls the weight for this queue. The default value is "17". This value is
restricted to 1-100. This parameter is only shown if "Scheduler Mode" is set
to "Weighted".
Summary of Contents for Falcon Gen-3 M-Class
