Falcon
M-Class
| User Guide
145
Table 4-76: System and Port Configuration Parameters
1
. User Module Legend
User Module
Name
The full name of a module that may request Port Security services.
Abbr
A one-letter abbreviation of the user module. This is used in the Users column in
the port status table.(see below)
2
. Port Status
The table has one row for each port on the selected switch and a number of columns.
Port
The port number to which the configuration below applies.
Click the
port number to see the status for this particular port.
Refer to next page
Users
Each of the user modules has a column that shows whether that module
has enabled Port Security or not. A '-' means that the corresponding
user module is not enabled, whereas a letter indicates that the user
module abbreviated by that letter (see Abbr above) has enabled port
security.
State
Shows the current state of the port. It can take one of four values:
Disabled
: No user modules are currently using the Port Security
service.
Ready
: The Port Security service is in use by at least one user module,
and is awaiting frames from unknown MAC addresses to arrive.
Limit Reached
: The Port Security service is enabled by at least the
Limit Control user module, and that module has indicated that the limit
is reached and no more MAC addresses should be taken in.
Shutdown
: The Port Security service is enabled by at least the Limit
Control user module, and that module has indicated that the limit is
exceeded. No MAC addresses can be learned on the port until it is
administratively re-opened on the Limit Control configuration Web-page.
Mac Count
(Current,Limit)
The two columns indicate the number of currently learned MAC
addresses (forwarding as well as blocked) and the maximum number of
MAC addresses that can be learned on the port, respectively.
If no user modules are enabled on the port, the Current column will
show a dash (-).
If the Limit Control user module is not enabled on the port, the Limit
column will show a dash (-).
Buttons
Auto-refresh
: Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds.
Refresh:
Click to refresh the screen.
Summary of Contents for Falcon Gen-3 M-Class
