FibroLAN Falcon Gen-3 M-Class, User Manual

Page: 254 / 473

Falcon M-Class | User Guide
254
4.18.5 IGMP Snooping Groups Information
Entries in the IGMP Group Table are shown on this section.
The IGMP Group Table is sorted first by VLAN ID, and then by group.
Navigating the IGMP Group Table
Each page shows up to 99 entries from the IGMP Group table, default being 20, selected through
the "entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the IGMP Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the
IGMP Group Table. Clicking the
Refresh button will update the displayed table starting from that or
the closest next IGMP Group Table match. In addition, the two input fields will - upon a button click
- assume the value of the first displayed entry, allowing for continuous refresh with the same start
address.
The >> will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the << button to
start over.
Figure 4-143: IGMP Snooping Groups Information
Table 4-137: IGMP Snooping Groups Parameters
VLAN ID
VLAN ID of the group.
Groups Group address of the group displayed.
Port Members Ports under this group.
Buttons Refresh: Refreshes the displayed table starting from the input fields.
Auto-refresh : Automatic refresh occurs every 3 seconds.
<<: Updates the table starting from the first entry in the IGMP Group
Table
>>: Updates the table, starting with the entry after the last entry
currently displayed.