FibroLAN Falcon Gen-3 M-Class, User Manual

Page: 371 / 473

Falcon M-Class | User Guide
371
Message
The detail message of the system log entry.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of
the page at regular intervals.
Refresh:
Updates the system log entries, starting from the current entry ID.
Clear :
Flushes the selected log entries.
<< :
Updates the table entries, starting from the first available entry.
<< :
Updates the table entries, ending at the last entry currently displayed.
>>:
Updates the table entries, starting from the last entry currently displayed
.
>>: Updates the table entries, ending at the last available entry ID.
Navigating the System Log Information Table
Each page shows up to 999 table entries, selected through the "entries per page" input field.
When first visited, the web page will show the beginning entries of this table
The "
Level " input field is used to filter the display system log entries.
The " Clear Level" input field is used to specify which system log entries will be cleared.
To clear specific system log entries, select the clear level first then click the Clear button.
The "Start from ID" input field allow the user to change the starting point in this table.
Clicking the Refresh button will update the displayed table starting from that or the closest
next entry match.
In addition these input fields will upon a Refresh button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start input field.
The
>> will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table.
Use the
<< to start over