FibroLAN Falcon Gen-3 M-Class, User Manual

Page: 129 / 473

Falcon M-Class | User Guide
129
4.10 Security Features
M-Class
series enables a set of security features. Security is realized by several different
mechanisms included in the Switch and Network sections
4.10.1 Switch
The Switch section contains the following sub-sections:
1. User Configuration
2. Privilege Level Configuration
3. Authentication Method Configuration
4. SSH Configuration
5. HTTPS Configurations
6. Access Management Configuration
7. Access Management Statistics
4.10.1.1 User Configuration
This subsection provides an overview of the current users.
Currently the only way to login as another user on the web server is to close and reopen the
browser.
Figure 4-70: User Configuration
Table 4-67:
User Configuration
Parameters
User Name The name identifying the user.
Privilege level The privilege level of the user. The allowed range is 1 to 15 . If the
privilege level value is 15, it can access all groups, i.e. that is granted the
fully control of the device. But others value need to refer to each group
privilege level. User's privilege should be same or greater than the group
privilege level to have the access of that group. By default setting, most
groups privilege level 5 has the read-only access and privilege level 10
has the read-write access. And the system maintenance (software
upload, factory defaults and etc.) need user privilege level 15. Generally,
the privilege level 15 can be used for an administrator account, privilege
level 10 for a standard user account and privilege level 5 for a guest
account.
Buttons
Add New User : Click to add a new user