Falcon
M-Class
| User Guide
180
4.10.3.3
Static ARP Inspection Table
This page shows the static ARP Inspection rules. The maximum number of rules is
256
on the
switch.
Figure 4-94: Static ARP Inspection Table display
Table 4-91: Static ARP Inspection Table parameters
Static ARP Inspection Table
Delete
Check to delete the entry. It will be deleted during the next save
Port
The logical port for the settings.
VLAN ID
The vlan id for the settings.
MAC
Address
Allowed Source MAC address in ARP request packets
IP Address
Allowed Source IP address in ARP request packets
Buttons
Add New Entry :
Click to add a new entry to the Static ARP Inspection table.
Save
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously
saved values.
4.10.3.4
Dynamic ARP Inspection Table
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP Inspection
Table contains up to 256 entries, and is sorted first by port, then by VLAN ID, then by MAC address,
and then by IP address. All dynamic entries are learning from DHCP Snooping.
Summary of Contents for Falcon Gen-3 M-Class
