Falcon
M-Class
| User Guide
260
Compatib
ility
Compatibility is maintained by hosts and routers taking appropriate actions
depending on the versions of MLD operating on hosts and routers within a
network.
The allowed selection is
MLD -Auto
,
Forced MLD v1
,
Forced MLD v2
,
Default compatibility value is MLD-Auto.
PRI
Priority of Interface.
It indicates the MLD control frame priority level generated by the system. These
values can be used to prioritize different classes of traffic.
The allowed range is
0
(best effort) to
7
(highest), default interface priority
value is 0.
RV
Robustness Variable
. The Robustness Variable allows tuning for the expected
packet loss on a LINK. The allowed range is
1
to
255
, default robustness
variable value is 2.
QI
Query Interval
. The Query Interval is the interval between General Queries
sent by the Querier. The allowed range is
1
to
31744
seconds, default query
interval is 125 seconds.
QRI
Query Response Interval
. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The
allowed range is
0
to
31744
in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds).
LLQI
Last Listener Query Interval
. The Last Listener Query Interval is the
Maximum Response Delay used to calculate the Maximum Response Code
inserted into Multicast Address Specific Queries sent in response to Version 1
Multicast Listener Done messages. It is also the Maximum Response Delay used
to calculate the Maximum Response Code inserted into Multicast Address and
Source Specific Query messages. The allowed range is
0
to
31744
in tenths of
seconds, default last listener query interval is 10 in tenths of seconds (1 second).
URI
Unsolicited Report Interval.
The Unsolicited Report Interval is the time
between repetitions of a node's initial report of interest in a multicast address.
The allowed range is
0
to
31744
seconds, default unsolicited report interval is 1
second
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved
values.
Refresh
: Refreshes the displayed table starting from the "VLAN" input fields.
<<:
Updates the table starting from the first entry in the VLAN Table, i.e. the
entry with the lowest VLAN ID.
>>:
Updates the table, starting with the entry after the last entry currently
displayed.
Add New MLD VLAN:
Click to add new MLD VLAN. Specify the VID and
configure the new entry.
Click "Save". The specific MLD VLAN starts working after the corresponding static
VLAN is also created.
Summary of Contents for Falcon Gen-3 M-Class
