Falcon
M-Class
| User Guide
229
Figure 4-129: SyncE Ethernet Port Configuration- second display
Table 4-123: PTP Clock Configuration Parameters
Ethernet Port Configuration
#
Indicates Ethernet port list
1000BaseT
AutoNego Mode
The Auto-negotiation operating mode (master or slave, in the SyncE context)
of the port. Applicable to fixed Copper ports only, operating in 1000BaseT
mode. Available modes are:
Auto:
the operating mode is automatically agreed by link partners
Prefer Slave:
the port will attempt to operate in slave mode (when the link
partner can be a master)
Prefer Master:
the port will attempt to operate in master mode (when the
link partner agrees to be a slave)
Force Slave:
the port will operate in slave mode only (i.e. the link partner
must be master for proper operation)
AutoNego status
Indicates the Auto-negotiation operating mode (master or slave).
SSM Enabled
Enable and disable of
SSM
signaling (ESMC) on this port.
SSM
is an abbreviation for
Synchronization Status Message
and contains a QL
(Quality level) indication
Summary of Contents for Falcon Gen-3 M-Class
