Falcon
M-Class
| User Guide
428
Table 6-6: Mirroring displays parameters
Mirroring & Remote Mirroring Configuration
Mode
To
Enabled/Disabled
the mirror or Remote Mirroring function.
Type
Mirror:
The switch is running on mirror mode.
The source port(s) and destination port are located on this switch.
Source:(RMirror)
The switch is a source node for monitor flow.
The source port(s), reflector port and intermediate port(s) are located on this switch
Intermediate: :(RMirror)
The switch is a forwarding node for monitor flow and the switch is
an option node.
The object is to forward traffic from source switch to destination switch.
The intermediate ports are located on this switch.
Destination: :(RMirror)
The switch is an end node for monitor flow.
The destination port(s) and intermediate port(s) are located on this switch
VLAN ID
The VLAN ID points out where the monitor packet will copy to.
The default VLAN ID is 200.
Reflector port
The The
reflector port
is a method to redirect the traffic to Remote Mirroring VLAN.
Any device connected to a port set as a reflector port loses connectivity until the Remote
Mirroring is disabled.
In the stacking mode, you need to select switch ID to select the correct device.
If you shut down a port, it cannot be a candidate for
reflector port
.
If you shut down the port which is a
reflector port
, the remote mirror function cannot work.
Note 1:
The reflector port needs to select only on Source switch type.
Note 2: The reflector port needs to disable MAC Table learning and STP.
Note 3: The reflector port only supports on pure copper ports
Source VLAN(s) Configuration
Source VLANs
The switch can support VLAN-based Mirroring.
If you want to monitor some VLANs on the switch, you can set the selected VLANs
on this field.
Note 1
:
The Mirroring session shall have either ports or VLANs as sources,
but not both.
Port Configuration
Port
The following table is used for port role selecting.
Summary of Contents for Falcon Gen-3 M-Class
