Falcon
M-Class
| User Guide
165
Logging
Specify the logging operation of this port. The allowed values are:
Enabled
: Frames received on the port are stored in the System Log.
Disabled
: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory
size and logging rate is limited.
Shutdown
Specify the port shut down operation of this port. The allowed values are:
Enabled
: If a frame is received on the port, the port will be disabled.
Disabled
: Port shut down is disabled.
The default value is "Disabled".
Note: The shutdown feature only works when the packet length is less
than 1518(without VLAN tags).
State
Specify the port state of this port. The allowed values are:
Enabled
: To reopen ports by changing the volatile port configuration of
the ACL user module.
Disabled
: To close ports by changing the volatile port configuration of
the ACL user module.
The default value is "Enabled
Counter
Counts the number of frames that match this ACE.
Buttons
Save:
Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously
saved values
Refresh:
Click to refresh the page; any changes made locally will be
undone.
Clear
: Click to clear the counters.
Summary of Contents for Falcon Gen-3 M-Class
