FibroLAN Falcon Gen-3 M-Class, User Manual

Page: 408 / 473

Falcon M-Class | User Guide
408
5.9.1 Port Configuration
The various M-Class devices ports can be configured using the procedure described in the
Port
Configuration
and Monitoring
5.9.2 User Configuration & Edit User
This subsection provides an overview of the current users. Currently the only way to login as
another user on the web server is to close and reopen the browser
Figure 5-33: Users Configuration
Table 5-31:
Users Configuration
Parameters
User Name The name identifying the user.-
This is also a link to Edit User display
Privilege level The privilege level of the user. The allowed range is 1 to 15 .
If the privilege level value is 15, it can access all groups, i.e.
that is granted the fully control of the device. But others
value need to refer to each group privilege level. User's
privilege should be same or greater than the group privilege
level to have the access of that group. By default setting,
most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system
maintenance (software upload, factory defaults and etc.)
need user privilege level 15. Generally, the privilege level 15
can be used for an administrator account, privilege level 10
for a standard user account and privilege level 5 for a guest
account.
Buttons
Add New User : Click to add a new user
By clicking on the “moose” word in the above Users Configuration display, you access the following
display, which allows you to edit a user
Figure 5-34: Edit User Configuration