Falcon
M-Class
| User Guide
272
4.19.3.2
LACP Port Status
This section provides a status overview for LACP status for all ports.
Figure 4-154: LACP Status
Table 4-147: LACP Status Parameters
Port
The switch port number.
LACP
'
Yes
' means that LACP is enabled and the port link is up.
'
No
' means that LACP is not enabled or that the port link is down.
'
Backup
' means that the port could not join the aggregation group but
will join if other port leaves. Meanwhile its LACP status is disabled.
Key
The key assigned to this port. Only ports with the same key can
aggregate together.
Aggr ID
The Aggregation ID assigned to this aggregation group.
Partner System
ID
The partners System ID (MAC address).
Partner Port
The “partners” port number connected to this port.
Partner Prio
The partner’s priority
Buttons
Auto-refresh
: Automatic refresh occurs every 3 seconds.
:
Check this box to enable an automatic refresh of the screen at regular
intervals.
Refresh:
Click to refresh the screen immediately.
Summary of Contents for Falcon Gen-3 M-Class
