FibroLAN Falcon Gen-3 M-Class, User Manual

Page: 70 / 473

Falcon M-Class | User Guide
70
4.7.3.2 VLAN Translation Mapping Table
This section allows you to create mappings of VLANs -> Translated VLANs and
organize these mappings into global Groups.
Figure 4-30: VLAN Translation Mapping Table
Table 4-28: VLAN Translation Mapping Table parameters
Group ID The VLAN Translation mappings are organized into Groups, identified by the
Group ID.
This way a port is configured to use a number of VLAN Translation mappings
easily by simply configuring it to use a given group.
Then number of possible groups in a switch is equal to the number of ports
present in this switch.
A port can be configured to use any of the groups, but only one at any given
time. Multiple ports can be configured to use the same group. A valid Group
ID is an integer value from 1 to 10.
Note: By default, each port is set to use the group with Group ID equal to the
port number. For example, port #1 is by default set to use group with GID =
1.
VID
Indicates the ID to which Group ID will be mapped. A valid VLAN ID ranges
from 1-4095.
TVID
Indicates the VLAN ID to which VLAN ID of an ingress frame will be translated
to (granted that the mapping is enabled on the ingress port that the frame
arrived at). A valid VLAN ID ranges from 1 to 4095.
Buttons
Remove All: Click to remove all VLAN Translation mappings.
Refresh: Refreshes the displayed table starting from the "VLAN ID" input
fields.
Auto-refresh : Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds.
Modification
Buttons You can modify each VLAN Translation mapping in the table using the
following buttons:
: Edits the mapping row.
: Deletes the mapping.
: Adds a new mapping.