Falcon
M-Class
| User Guide
101
Queue
Scheduler
Percent
Shows the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
Port Shaper
Enable
Controls whether the port shaper is enabled for this switch port.
Port Shaper
Rate
Controls the rate for the port shaper. The default value is
500
. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to
1-3300 when the "Unit" is "Mbps".
Port Shaper
Unit
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps".
The default value is "kbps".
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Cancel:
Click to undo any changes made locally and return to the previous page.
4.8.6
QoS Egress Port Tag Remarking
This section provides an overview of
Egress Port Tag Remarking for all switch ports.
By clicking on any port, you may configure the selected port (see example for port 6)
Figure 4-54: QoS Egress Port Tag Remarking
Summary of Contents for Falcon Gen-3 M-Class
