Festo MPA-FB Series, Manual

Page: 26 / 168

1. Summary of components
1−10
Festo P.BE−MPA−EN en 0502b
The valves on the MPA valve terminal are marked by identifi
cation codes. By means of this identification on the front of
the valve plate, you can ascertain the equipment fitted on
your MPA valve terminal.
Ident. code Valve plate
B Valve plate, 5/3−way, mid position pressurized
D Valve plate, two 2/2−way, single−solenoid, in basic position closed
E Valve plate, 5/3−way, mid position exhausted
G Valve plate, 5/3−way, mid position closed
H Valve plate, two 3/2−way, control side 12 in basic position open
control side 14 in basic position closed
J Valve plate, 5/2−way, double−solenoid
K Valve plate, two 3/2−way, single−solenoid, in basic position closed
M Valve plate, 5/2−way, single−solenoid
N Valve plate, two 3/2−way, single−solenoid, in basic position open
W Valve plate, 3/2−way, single−solenoid, in basic position open, external pressure
supply
X Valve plate, 3/2−way, single−solenoid, in basic position closed, external
pressure supply
Table1/2: Ident. code of the valve plates
Further information on the valve plates can be found in Ap
pendix B.