Festo MPA-FB Series, Manual

Page: 75 / 168

3. Installation
3−29
Festo P.BE−MPA−EN en 0502b
3.4.3 MPA valve terminal with MPM connection
Assign the addresses in ascending order without gaps
(see example)
Addess assignment does not depend on whether blanking
plates or valve plates are fitted.
Depending on the electronic module, a valve location oc
cupies the following number of addresses:
Number
f dd
Electronic module
of addresses
MPA 1 MPA 2
one address VMPA1−MPM−EMM− 4 VMPA2−MPM−EMM− 2
two addresses VMPA1−MPM−EMM− 8 VMPA2−MPM−EMM− 4
Table3/7: Electronic module for MPM connection
If an electronic module occupies 2 addresses, the follow
ing applies:
pilot solenoid 14 occupies the lower−value address;
pilot solenoid 12 occupies the higher−value address.