Festo MPA-FB Series, Manual

Page: 106 / 168

5. Diagnosis and error treatment
5−10
Festo P.BE−MPA−EN en 0502b
2
1
2
3
4
5
6
1
Fastening screws of the component
2
Valve plate or blanking plate
3
Cord seal
4
2 conical seals per component (ob
serve the alignment)
5
Sub−base
6
Electronic module
Fig.5/3: Fitting valve plates or blanking plates (MPA2)
4. Place the component on the sub−base.
5. Screw the component at first only slightly and then
tighten with the following torque:
MPA1: 0.25 Nm (±20%)
MPA2: 0.65 Nm (±20%)