Festo MPA-FB Series, Manual

Page: 15 / 168

Contents and general instructions
XIII
Festo P.BE−MPA−EN en 0502b
The following product−specific terms and abbreviations are
used in this manual:
Term/abbreviation Meaning
Exhaust plate Plate for ducted exhaust with connection 3/5
Sub−base Pneumatic linking block with 4 valve locations (MPA1) or 2 valve loca
tions (MPA2) for single−solenoid, double−solenoid or mid−position
valves, with work connections 2 and 4.
Basic components Component (pneumatic interface, MP sub−base, sub−base or supply
unit) on which further components can be mounted (exhaust plates,
large surface−mounted silencer, valve plate or blanking plate).
CPX modules Common term for the various modules which can be incorporated in a
CPX terminal
CPX terminal Modular electric terminal type 50
I/O input/output modules
Electronic module Module in the sub−base with LED and coil management
End plate Extreme right−hand plate of the MPA valve terminal and extreme left−
hand plate of the CPX terminal with holes for fitting onto a wall
Manual override Manual override
Components Common term for pneumatic interface, MP sub−base, exhaust plate,
large surface−mounted silencer, pneumatic sub−base, supply unit,
end plate, valve plate and blanking plate
MP connection Electric multipin connection with fixed electric linking type
MPA
1 − MP −...
MPM connection Electric multipin connection with modular electric linking type MPA...−
MPM
−..
MP sub−base Base with electric multipin connection and pneumatic connections
MPA1 Designation of the MPA valve terminal with 10 mm wide valve plates
Valve terminal type MPA M odular P erformance S ub−base valve terminal (type 32) with MP con
nection or for CPX terminal